Operating The Control Valves-Versa Side Mount - Alamo Industrial Versa Series Operator's Manual

7.1 Operating The Control Valves-Versa Side Mount

VERSA MOWER LIFT
The handle nearest the center of the tractor, actuates the Lift Cylinder.
Pulling the valve handle back, towards the operator, causes the lift cylinder to raise the Extension Arm
If the handle is released, the valve will automatically return to center and the Extension Arm will be locked in
place.
Pushing the valve handle forward, away from the operator, causes the lift cylinder to lower the Extension Arm.
Pulling the handle all the way back until it locks places the mower lift function in float, allowing the unit to rise
and fall with the terrain. OPS-B 0051
Make certain that the Boom swing path is clear of bystanders, powerlines, and obstructions
to prevent injury, electrocution, and possible machine damage. Swing Boom SLOWLY
AND CAREFULLY. Avoid sudden starting and stopping. (Ops-0002-MISC)
VERSA MOWER TILT
The handle furthest to the center of the tractor, actuates the Tilt Cylinder.
Pulling the valve handle back, toward the operator, causes the Tilt Cylinder to raise the Mower Head.
If the handle is released, the valve will automatically return to center and the head will be locked in place.
Pushing the valve handle forward, away from the operator, causes the Tilt Cylinder to lower the Versa Mower
Head.
Versa 03/09
© 2009 Alamo Group Inc.
OPERATION
Operation Section 3-27