Connecting Video Components - Denon AVR-4802 Operating Instructions Manual

Connecting video components

• To connect the video signal, connect using a 75
• When making connections, also refer to the operating instructions of the other components.
TV or DBS/SAT tuner
AUDIO
VIDEO
B
OUT
R L OUT
R L
Connecting a TV, DBS/SAT tuner
TV or DBS/SAT
• Connect the TV's or DBS/SAT tuner's video output jack (VIDEO OUTPUT) to
the VIDEO (yellow) TV,DBS/SAT IN jack using a
pin plug cord.
• Connect the TV's or DBS/SAT tuner's audio output jacks (AUDIO OUTPUT)
to the
AUDIO
AUDIO
VIDEO
OUT
R L OUT
L
R
Connecting a video disc player VDP
VDP
• Connect the video disc player's video output jack (VIDEO OUTPUT) to the
VIDEO
• Connect the video disc player's analog audio output jacks (ANALOG AUDIO
OUTPUT) to the
• A DVD player can be connected to the DVD jacks in the same way.
• It is also possible to connect a video disc player, DVD player, video camcorder,
game machine, etc., to the V.AUX jacks.
LD player or other component
equipped with digital output jacks
Note on connecting the digital
input jacks
• Only audio signals are input to the
digital input jacks. For details, see
page 6 and page 29.
Connecting a video decks
• There are three sets of video deck (VCR) jacks, so three video decks can be connected for simultaneous recording or video copying.
Video input/output connections:
• Connect the video deck's video output jack (VIDEO OUT) to the
(yellow) VCR-1 OUT jack using 75
Connecting the audio output jacks
• Connect the video deck's audio output jacks (AUDIO OUT) to the
OUT jacks using pin plug cords.
Connect the another video deck to the VCR-2 or VCR-3 jacks in the same way.
/ohms video signal cable cord. Using an improper cable can result in a drop in picture quality.
TV or DBS/SAT IN jacks using pin plug cords.
LD player, CDV player, etc.
(yellow) VDP IN jack using a 75
AUDIO VDP IN jacks using pin plug cords.
IN DVD IN
Y P /C P /C Y
PRE OUT B B R R
FR FL IN
SW C
DVD VDP TV DBS/
SAT
SR SL
SBR SBL
IN
DBS/
L
PHONO CD DVD VDP TV SAT
L
R
R
L
EXT. IN
L
FRONT CENTER SURROUND SB
R
L
R
R
SW
COAXIAL OPTICAL
OUTPUT
VIDEO
/ohms video coaxial pin plug cords.
AUDIO
75 /ohms video coaxial
/ohms video coaxial pin plug cord.
TV IN DBS/ OUT MONITOR
SAT
COMPONENT
VIDEO
P /C P /C Y P /C P /C Y P /C P /C
B B R R B B R R B B R R
OUT OUT
S-VIDEO
V. AUX VCR-1 VCR-2 VCR-3 VCR-1 VCR-2 VCR-3 1-MONITOR-2
VIDEO
L
AUDIO
R OUT IN OUT PRE OUT
CDR/ CDR/ MULTI
V. AUX VCR-1 VCR-2 VCR-3 VCR-1 VCR-2 VCR-3 TAPE TAPE ZONE
L
R
R
DIGITAL
IN OUT
L
1 2 3 1 2 3 4 5 4
COAXIAL OPTICAL
Video deck 2
Video deck 1
(yellow) VCR-1 IN jack, and the video deck's video input jack (VIDEO IN) to the
VCR-1 IN jacks, and the video deck's audio input jacks (AUDIO IN) to the
Monitor TV
VIDEO
IN
Connecting a Monitor TV
MONITOR OUT
• Connect the TV's video input jack
(VIDEO INPUT) to the
MONITOR OUT jack using a 75
/ohms video coaxial pin plug cord.
• The monitor TV can also be
connected in the same way to the
VIDEO MONITOR OUT-2 jack. Note,
however, that the AVR-4802's on-
screen display signals are not output
from this jack. (See page 31.)
SPEAKER SYSTEMS
FRONT
L
SURROUND
-A
L
SURROUND
-B
L
AC IN
SPEAKER
IMPEDANCE
FRONT, CENTER,
SB / MULTI
SB / MULTI
6~16 L
SURROUND
A OR B 6~16
A + B 8~16
AC OUTLETS
L
R
RS-232C
SWITCHED TOTAL 120W (1A) MAX.
AV 120V 60Hz
5
R
R
OUT
R
R
OUT
VIDEO
L R L
L R L OUT IN
IN
VIDEO
AUDIO
L R L
L R L OUT IN
IN
VIDEO
AUDIO
VIDEO
VCR-1
AUDIO
7