Preset Memory; Checking The Preset Stations - Denon AVR-4802 Operating Instructions Manual

Preset memory

1 Use the "Auto tuning" or "Manual tuning" operation to tune
in the station to be preset in the memory.
2 Press the MEMORY button.
(Remote control unit)
3 Main unit:
Press the MODE SELECT button until "TUNER PRESET"
appears on the set's display.
Remote control unit:
Press the SHIFT button and select the desired memory block
(A to E).
TUNING
PRESET
(Main unit)
4 Main unit:
Select the desired preset channel (1 to 8).
Remote control unit:
Press the PRESET UP or DOWN button to select the desired
preset channel (1 to 8).
SELECT
(Main unit)

Checking the preset stations

The preset broadcast stations can be checked on the on screen display.
1 Press the ON SCREEN button repeatedly until the "Tuner Preset Stations" screen appears on the
on screen display.
(Remote control unit)
58
(Remote control unit)
(Remote control unit)
1
4
3
5 Press the MEMORY button again to store the station in the
preset memory.
(Remote control unit)
To preset other channels, repeat steps 2 to 5.
A total of 40 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to E.
4 3
2, 5