McAfee EPOLICY ORCHESTRATOR 3.6 - WALKTHROUGH GUIDE Manual page 90

®
ePolicy Orchestrator 3.6 Walkthrough Guide
To add Active Directory containers and sub-containers to your Directory:
Directory
1 Right-click , and select
Add Sites
2 In the dialog box, click
New Site
3 In the dialog box, type a name for the site, for example
OK
.
Send agent package
4 Make sure that
Directory
5 Right-click , and select
Next Active Directory Import
6 Click when the
Figure 8-3 Active Directory Import wizard
ePolicy Orchestrator Destination Group
7 On the
or a site of the Directory to import the Active Directory systems.
For the purposes of this guide, select the site you just created from the
ePO location
drop-down list, then click
If you want to import your entire Active Directory structure, minus exceptions, to use
as your ePolicy Orchestrator
Active Directory structure, minus exceptions, being imported into the Lost&Found of
Note
Directory
the root.
Active Directory Authentication
8 On the
administrative rights for the Active Directory server.
Active Directory Source Container
9 In the
Active Directory Browser
source container in the
10 If you wish to exclude a specific sub-container of the selected container, click
Exclude the following sub-containers
under
OK
exclude and click .
Next
11 Click , and view the active log for any new systems that have been imported.
Verify in the console tree that these systems were imported.
New | Site
.
Add
.
is NOT selected, then click
All Tasks | Import Active Directory Computers
wizard appears.
panel of the wizard you can select the root
Next
.
Directory Root
, select from this list. This results in the
panel, type Active Directory user credentials with
Browse
dialog box, click
dialog box, then click
, then select the desired sub-container to
87
Installing and setting up
Container1
, then click
OK
.
.
Import to this
to select the desired
OK
.
Add
8