McAfee EPOLICY ORCHESTRATOR 3.6 - WALKTHROUGH GUIDE Manual page 126

®
ePolicy Orchestrator 3.6 Walkthrough Guide
S T E P
7
Rogue detection and remediation
Now you need to introduce a system into the test environment that does not have an
agent. You can do this by several methods, such as joining a laptop to the test network,
or by moving a system from an outside domain to the test domain you created earlier.
1 Add a system that does not have an ePolicy Orchestrator agent to the test network.
Machine
2 Go to the tab, then click
it reports back to the server and places the system in the
3 Once it appears in this list, take a five minute break to provide time for the agent
installation.
4 Once the agent installation completes, the system has a
You are not finished yet. You still must place the now managed system into its
Directory
appropriate home in the
Rogue Type
5 Once the system's
| Rogue Systems
of the console tree.
Lost&Found
The group is a holding place for systems ePolicy Orchestrator has
discovered, but doesn't know where to place within the
6 Click and drag the system to the desired site or group in your ePolicy Orchestrator
Directory
.
Congratulations! You successfully configured the sensor, deployed the sensor,
configured an automatic response which you saw taken on the rogue you introduced,
and placed the newly managed system into its appropriate spot in the
List
. Once the sensor has detected a rogue system,
.
Managed
changes to , it is placed in
Directory
123
Advanced Feature Evaluations
Rogue System Detection
Machine List
.
Rogue Type Managed
of .
Directory | Lost&Found
.
Directory
.
9