Fsb Frequency Select Signals (Bsel[2:0]); Core Frequency To Fsb Multiplier Configuration - Intel E3300 Datasheet

Table 15.

Core Frequency to FSB Multiplier Configuration

Multiplication of System
Core Frequency to FSB
NOTES:
1. Individual processors operate only at or below the rated frequency.
2. Listed frequencies are not necessarily committed production frequencies.
2.8.2

FSB Frequency Select Signals (BSEL[2:0])

The BSEL[2:0] signals are used to select the frequency of the processor input clock
(BCLK[1:0]).
frequency associated with each combination. The required frequency is determined by
the processor, chipset, and clock synthesizer. All agents must operate at the same
frequency.
The Intel
(selected by a 200 MHz BCLK[1:0] frequency). Individual processors will only operate
at their specified FSB frequency.
For more information about these signals, refer to
28
Frequency
1/6
1/7
1/7.5
1/8
1/8.5
1/9
1/9.5
1/10
1/10.5
1/11
1/11.5
1/12
1/12.5
1/13
1/13.5
1/14
1/15
Table 16 defines the possible combinations of the signals and the
® ®
Celeron processor E3000 series operates at a 800 MHz FSB frequency
Core Frequency
Notes
(200 MHz BCLK/
800 MHz FSB)
1.20 GHz
1.40 GHz
1.5 GHz
1.60 GHz
1.70 GHz
1.80 GHz
1.90 GHz
2 GHz
2.1 GHz
2.2 GHz
2.3 GHz
2.4 GHz
2.5 GHz
2.6 GHz
2.7 GHz
2.8 GHz
3 GHz
Section
Electrical Specifications
1, 2
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
4.2.
Datasheet