Input Trays; Output Trays - Xerox 7400DXF - Phaser Color LED Printer Administrator's Manual

Input Trays

The following table lists the PCL commands for the input trays supported by the
Phaser 7400 printer. The table also lists the alternate tray used if the optional input tray is not
installed.
Note: When more than one command is listed, you can use either command.
Input Trays
Tray 1 (MPT) in multi-sheet mode
Tray 1 (MPT) in manual feed mode
Tray 2
Tray 3
Tray 4
Tray 5
Tray 6
Autoselect
Current tray/page eject
* The character that follows the "&" in the command is the lowercase letter "L".

Output Trays

The following table lists the PCL commands and PJL values for the output trays supported by
the Phaser 7400 printer.
Output Tray
Top output tray
Left-side output tray
Finisher output tray
* The character that follows the "&" in the command is the lowercase letter "L".
** The PJL Value is used with the PJL "OUTBIN" variable.
PCL 5 Command
<Esc>&l4H
<Esc>&6H
<Esc>&l2H
<Esc>&l3H
<Esc>&l1H
<Esc>&l5H
<Esc>&l8H
<Esc>&l20H
<Esc>&l21H
<Esc>&l22H
<Esc>&l7H
<Esc>&l10H
PCL 5 Command
<Esc>&l1G
<Esc>&l2G
<Esc>&l4G
System Administrator Guide
B-7
Phaser 7400 PCL Commands
*
Alternate Tray
n/a
n/a
n/a
Tray 2
Tray 1
Tray 1
Tray 1
n/a
n/a
*
PJL Value
FACEDOWN, UPPER,
STANDARD, or OFFSET
LOWER
OPTIONALOUTPUTBIN1