Setting Up A Certificate - Xerox 7400DXF - Phaser Color LED Printer Administrator's Manual

Setting Up a Certificate

To modify a self-signed certificate so it is specific to your printer or to install a downloaded
root-signed certificate on the printer:
1. Launch your web browser.
2. Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3. Click Properties.
4. Select the Security folder on the left sidebar.
5. Select SSL.
6. If prompted, enter your Admin or Key User name and password.
The Current State field displays the current state of the printer. Possible values include:
■ A digital certificate is not established on this machine. This state displays if an
error occurred when the certificate was created.
■ A self-signed certificate is established on this machine.
■ A digital certificate has been installed on this machine.
7. Click the Create Certificate button.
8. Do one of the following:
To modify a self-signed digital certificate, select Self-Signed Certificate.
■
■ To install a signed digital certificate that includes a private key from a trusted
Certificate Authority (CA), select Install downloaded Certificate.
9.
Click the Next button.
10.
Do one of the following:
■ If you selected Self-Signed Certificate, enter the appropriate information in the
fields, and then click the Finish button to save the settings. For more information,
including a description of the fields, click the Help button in CentreWare IS to view
the online help.
■ If you selected Install Downloaded Certificate, click the Browse button to select the
certificate from the PC's hard drive, and then click the Finish button to validate and
install the certificate. Once the certificate is installed, the main SSL page displays.
See also:
About Certificates on page 4-3
System Administrator Guide
4-6

Setting Up a Certificate