Table of Contents
Advertisement
Installing an "option-added" firmware card
Follow the instructions in this section to install an optional "option-added" firmware or flash memory card.
Note: "Option-added" firmware and flash memory cards offered for other Lexmark printers cannot be used
with your printer.
"Option-added" fiOnly one of each type of card is supported.
Warning:
"Option-added" firmware and flash memory cards are easily damaged by static electricity. Touch
something metal on the printer before you touch a card.
1
Remove the system board access cover. For more information, see Removing the system board access cover.
2
Unpack the card.
Avoid touching the metal pins on the bottom of the card. Save the packaging.
3
Holding the card by its sides, align the pins on the card with the holes on the system board.
4
Push the card firmly into place.
The entire length of the connector on the card must touch the system board.
Be careful not to damage the card connectors.
Installing and removing options
Pins
Installing memory and option cards
17
Advertisement
Table of Contents
