Renaming The Printer Connected To The Print Server - HP wp110 - 802.11b Wireless Print Server Configuration Manual

4. Set the following options:
– Mode: computer to computer
– SSID: enter appropriate SSID for the
computer to computer network
– Channel: 10
Note Only channels 10 – 13 (2.457 –
2.472 GHz) may be used in France. For
indoor use only.
– WEP Req: disable
5. Click OK.
The notification message screen
appears.
6. Click OK.
The print server is set to computer-to-
computer mode.
renaming the printer
connected to the print server
1. Double-click the hp wp110 utility icon.
The hp wp110 utility screen appears.
2. If in AirPort Network mode, double-
click the appropriate AppleTalk Zone
to display the name of the printer
connected to the print server that is
being renamed.
3. Click the name of the printer being
renamed.
4. Select Setup > AppleTalk.
The AppleTalk Configuration screen
appears.
5. Select the name of the printer from the
drop down menu that is being
renamed.
6. Enter the new name for the printer,
then click OK.
7. Select the newly renamed printer in
the Chooser.
13