HP 615N - JetDirect Print Server Setup Manual page 44

Table C-2. EIO Graphical Control Panel Menu (5 of 5)
Menu Item Options
LINK
SPEED
ENWW
Description of settings
Selects the network link speed and
communication mode for the print server.
For proper communications, the Jetdirect
settings must match the network.
AUTO (default): The print server will
automatically configure itself to
match the network's link speed and
communication mode. If it fails, 100T
HALF is set.
10T HALF: 10 Mbps, half-duplex
operation.
10T FULL: 10 Mbps, full-duplex
operation.
100T HALF: 100 Mbps, half-duplex
operation
100T FULL: 100 Mbps, full-duplex
operation
HP Jetdirect EIO Control Panel Menus 44