Alamo SHD62 Operator's Manual page 88

ALAMO INDUSTRIAL SHD62, SHD74, SHD88 & SHD96
SUPER-HEAVY-DUTY FLAIL MOWER OPERATION INSTRUCTIONS
Alamo Industrial SHD flail mowers are manufactured with quality material by skilled workers. These mowers
are designed for cutting grass and small weeds up to 1". The mower is equipped with protective deflectors to
prevent objects being thrown from the mower by the blades, however, no shielding is 100% effective. All
shields, guards, and deflectors equipped on the mower must be maintained in good operational condition.
It is the operator's responsibility to be knowledgeable of all potential operating hazards and to take every
reasonable precaution to ensure oneself, others, animals, and property are not injured or damaged by the
mower, tractor, or a thrown object. Do not operate the mower if passersby, pets, livestock, or property are
within 100 yards of the unit.
This section of the Operator's Manual is designed to familiarize, instruct, and educate safe and proper mower
use to the operator. Pictures contained in this section are intended to be used as a visual aid to assist in
explaining the operation of a SHD flail mower and are not specific to any model. Some pictures may show
shields removed for picture clarity. NEVER operate implement without all shields in place and in good
operational condition. The operator must be familiar with the mower and tractor and all associated safety
practices before operating the mower and tractor. Proper operation of the mower, as detailed in this manual,
will help ensure years of safe and satisfactory use of the mower.
IMPORTANT: To avoid mower damage, retorque all bolts after the first 10 hours of operation. Refer to the
Torque Chart at the
tightened.
READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS
MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND
IMPLEMENT. If you do not understand any of the instructions, contact your nearest authorized dealer for a
full explanation. Pay close attention to all safety signs and safety messages contained in this manual and
those affixed to the implement and tractor. OPS-U- 0001
READ, UNDERSTAND, and FOLLOW the following Safety Messages. Serious injury or
death may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards.
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las
medidas de seguridad.
SHD 03/09
© 2009 Alamo Group Inc.
OPERATION
end of the Maintenance
(SG-3)
Operation Section 4-2
Section to ensure
(SG-2)
bolts are properly