•
Ensure rubber deflectors are in position and not
damaged. Replace worn, broken, and missing
sections immediately.
•
Ensure the rollers are in good condition and
rotate freely.
•
Ensure the driveline integral shield is in good
condition and rotate freely.
•
Inspect that all bolts and screws are in position
and are properly torqued. OPS-F- 0004
•
Inspect the condition of the drive belts.
•
Ensure the slip clutch (rear mower section only)
is properly adjusted and the friction plates are
not
frozen
together.
Maintenance Section for proper slip clutch
maintenance.
•
Ensure the slop clutch shield and drive belts
shields are in place and in good repair.
•
Ensure the tractor PTO master shield is in
place,
lowered
and
OPS-F- 0016
•
.Inspect oil level in gearbox and replenish if
needed. A low oil level is a warning sign that
the gearbox may be cracked or its seal is
damaged and needs to be replaced.
•
Perform scheduled lubrication as specified in
the maintenance section. OPS-F- 0017
SHD 03/09
© 2009 Alamo Group Inc.
OPERATION
Reference
the
in
good
condition.
Operation Section 4-18