Denon AVR-485S Operating Instructions Manual page 48

ENGLISH
DSP surround simulation
• To operate the surround mode and surround parameters from the
remote control unit.
1
Select the surround mode for the input channel.
The surround mode switches in the following order each time
the DSP SIMULATION button is pressed:
MATRIX
2
To enter the surround parameter setting mode, press the
SURROUND PARAMETER button.
• The surround parameter switches in the following order
each time the SURROUND PARAMETER button is pressed
for the different surround modes.
(Remote control unit)
If you do want the bass and trable to be adjusted, turn off the tone defeat mode.
3
Set the various surround parameters.
• ROOM SIZE setting
SMALL MED-S
• EFFECT LEVEL setting
• DELAY TIME setting
0ms
48
(Remote control unit)
MONO MOVIE ROCK ARENA
VIDEO GAME JAZZ CLUB
• MONO MOVIE
• ROCK ARENA
• JAZZ CLUB
• VIDEO GAME
ROOM SIZE
EFFECT LEVEL
TONE DEFEAT
SURROUND BACK
DEFAULT
ROOM SIZE MED
MED MED-L
or or
EFFECT LEVEL 10
1 10 15
or or
DELAY 30ms
30ms 110ms
or or
• MATRIX • VIRTUAL
DELAY TONE DEFEAT
TONE DEFEAT DEFAULT
SURROUND BACK
DEFAULT
• D. COMP. setting
LARGE OFF
NOTE:
This parameter is displayed during DOLBY DIGITAL playback.
• LFE setting
-10dB
NOTE:
This parameter is displayed during DOLBY DIGITAL and DTS
playback.
1
2
4
3 3
D.COMP. OFF
LOW MID
or or
LFE 0dB
-5dB 0dB
or or
HIGH