Table of Contents
Advertisement
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as (described)
below.
1
Select the speaker whose level you want to adjust.
(Remote control unit)
2
The channel switches as shown below each time the button
is pressed.
(Remote control unit)
FL
CNTR
NOTE: Please make sure the "AUDIO" position of the slide
switch on the remote control unit.
3
Adjust the level of the selected speaker.
(Remote control unit)
Default setting of channel level is 0 dB.
The level of the selected speaker can be adjusted within
the range of +12 to –12 dB using cursor buttons.
SW channel level can be turned off by decreasing one step
from –12 dB.
OFF ´ –12 dB ´ 12 dB
FR
SR
SB
SW
SL
3
3
1, 2
ENGLISH
39
Hide quick links:
Advertisement
Table of Contents
