Advanced Operation; Night Mode; User Mode Function; Storing The Settings In The Memory - Denon AVR-1707 Operating Instructions Manual

Advanced Operation

Night mode

The night mode can be set when playing Dolby Digital sources. The
dialogues are easier to hear at night and when listening with the
volume low.
[NIGHT]
Press .
• Canceling night mode:
Press [NIGHT] again.
• When the night mode is set to "ON", the "D.COMP" surround
parameter can not be selected.

User mode function

The AVR-1707 is equipped with a function for storing the selected
input source, the auto surround mode and input mode in the memory
and selecting these settings when you want to use them.

Storing the settings in the memory

1 The following are stored in the memory:
q q Currently set input source
w w Currently set surround mode
e e Currently set input mode
2
USER MODE
Press until "Memory" is displayed.

Calling the settings out

USER MODE
Press at which the settings you want to call
out are stored.
Combining the currently playing sound with the
desired image (VIDEO SELECT function)
[VIDEO SELECT]
Press until the desired image appears
on the monitor.
• To cancel, press [VIDEO SELECT] to select "SOURCE".
• The video source selected with the video select function is stored in
the memory for the different input sources.

Personal memory plus function

The surround mode last selected and the input mode setting are stored
individually for the different input sources.
The surround parameters, tone control settings and playback level
balance for the different output channels are memorized for each
surround mode.
33
ENGLISH
®

Playing the iPod

The music recorded on the iPod can be played when using a Control
Dock for iPod (ASD-1R, sold separately). The iPod can be controlled
using the buttons on the main unit and the remote control unit.
iPod is a trademark of Apple Computer, Inc., registered
in the U.S. and other countries.
With the iPod, non-copyrighted contents and contents that may be
legally reproduced or played may be reproduced and played by
individuals for their personal use. Violating copyrights is prohibited
by law.
1
Connect the AVR-1707 and iPod using the Control
Dock for iPod (ASD-1R) ( page 17).
2
Assign the input terminal at "Setting the iPod
Assignment" ( page 39).
3
INPUT SELECTOR
Use to select the function assigned in
step 2.
• Display "Remote iPod" on the main unit's display.
R e m o t e i P o d
If the screens above are not displayed, the iPod may not be
properly connected. Check the connections and settings.
4
[D D H H F F G G ] [ENTER]
Operate using and
the iPod's screen.
• The optional standard Control Dock for iPod is DENON ASD-1R sold
separately.
NOTE:
• DENON will accept no responsibility whatsoever for loss or
damage of data on an iPod occurring when the iPod is used
connected to the AVR-1707.
• Some of the functions may not operate, depending on the type
of iPod and the software version.
ENGLISH
while watching