Auto Tuning; Manual Tuning; Preset Memory; Recalling Preset Stations - Denon AVR-1707 Operating Instructions Manual

ENGLISH
Basic Operation
<INPUT SELECTOR> BAND
SHIFT
CHANNEL TUNING <RDS>
SHIFT
TUNING
[MODE]
BAND
[MEMORY]
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Auto tuning

<PTY> <RT>
1 < INPUT SELECTOR >
Use
[TUNER]
.
2
BAND
Press
3
[MODE]
Press
• The "AUTO" indicator lights.
4
TUNING
Press
• Automatic searching begins.
CHANNEL
• If tuning does not stop at the desired station, use to the "Manual
tuning" operation.

Manual tuning

< INPUT SELECTOR >
1
Use
[TUNER]
.
[TUNER]
2 BAND
Press
3
[MODE]
Press
Check that the display's "AUTO" indicator turns off.
4
TUNING
Press
The frequency changes continuously when the button is held in.
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the "STEREO" indicator turns off.
to select "TUNER" or press
to select "AM" or "FM".
to set the auto tuning mode.
.
to select "TUNER" or press
to select "AM" or "FM".
to set the manual tuning mode.
.
30
ENGLISH

Preset memory

1
Use the "Auto tuning" or "Manual tuning" operation
to tune in the station to be preset in the memory.
2 [MEMORY]
Press .
3
SHIFT
Press to select the desired memory block (A to
G).
4
CHANNEL
Press to select the desired preset channel
(1 to 8).
5
[MEMORY]
Press again.
• Store the station in the preset memory.
• To preset other channels, repeat steps 2 to 5.
A total of 56 broadcast stations can be preset — 8 stations (channels
1 to 8) in each of blocks A to G.
• The memory block can also be selected by pressing SHIFT.

Recalling preset stations

1
SHIFT
Press to select the memory block.
2
CHANNEL
Press to select the desired preset channel.
Basic Operation