Changing tractor positions
Converting the push tractor to pull tractor position
1
Make sure the printer is unplugged from the electrical outlet.
2
Make sure paper is not loaded in the printer.
3
Pull the front cover up and out of the way.
4
Hold down the latching levers while you lift and pull out the tractor unit from the printer.
1
Tractor unit
2
Latching levers
5
Remove the ribbon access cover.
6
Turn the tractor unit around so that the latching levers are upright, facing you.
7
Place the tractor against the back slant of the printer along the tractor guides.
1
2
45