Resonator - Lexicon REFLEX - REV User Manual

LF Cut Predelay
Richness
APM Parameter
Setting Name
1 Resonance Feedback
2 Tuning
3 Effects Level
4 Predelay
5 Low Frequency Cutoff
6 Shimmer
7 – –
8 Richness
9 Slope
10 – –
Slope
Res Feedback
Tuning
Shimmer
Display Range
-32 to +32 -99...-87% to +87...+99%
-64 to +64 -8 to +7 semitones
1 to 128 0-100%
1 to 128 0-524ms
1 to 128 19.5Hz-13.5kHz
1 to 16 0-1200ms
– – – –
1 to 16 0-120 cents
1 to 32 -15 to +15 (arbitrary units)
– – – –
fects of multi-stringed instruments. A series
of resonators tuned to a chromatic scale are
provided with controls for tuning and damp-
ing.
Effects
Level
include enhancing synthetic instruments
and amplified strings. Caution is advised in
using this algorithm with voice (especially
spoken) and percussion.
nators over a range of more than an octave
to match the tuning of your instrument.
Actual Range
Predelay spaces out the onset of the resona-
tors to produce a strumming effect. Low
Frequency Cutoff filters the input audio to
reduce boominess for low tunings. Reso-
nance Feedback affects the lowest pitch
resonator. The other resonators are set
based on this value and the value of Slope.
Shimmer sets the period of resonator
detuning. This parameter is factory preset to
change one resonator every 0.5 seconds.
Richness sets the amount of periodic
detuning. Slope controls timbre.
16.
26

Resonator

This algorithm simulates the acoustic ef-
Suggested applications for this algorithm
The Tuning parameter tunes all 12 reso-
This algorithm was used to create Preset
A5