Hall - Lexicon REFLEX - REV User Manual

HF Cut Diffusion
APM Parameter
Setting Name
1 Mid Reverb Decay
2 Predelay
3 Effects Level
4 Bass Multiiply
5 High Frequency Cutoff
6 Size
7 Predelay Feedback
8 Diffusion
9 Reflection Level
10 Reflection Delay
Reflection Level
Reflection
Delay
Pdly Fbk
Reverberator
Size
Predelay
Bass Mult
Reflection
Delay
Reflection Level
Display Range
1 to 16
1 to 128
1 to 128
-8 to +8
1 to 16
1 to 64
-128 to +128
1 to 128
1 to 128
1 to 128
Mid
Effects
Reverb
Level
Decay
Actual Range
.25-6.5seconds, typical
0-246ms
0-100%
.3-2.5x, nominal
321Hz-13.8kHz
8-71 meters
-99 to +99%
0-100 (arbitrary units)
0-100%
40-168ms
22
This is Lexicons' famous hall reverb,
used to create spaces as large as a concert
hall, or as intimate as a small club. In Reflex
it is used to create the various halls and
rooms found in Presets 1-6.
The clean reverberation of the Hall algo-
rithm is designed to add spaciousness, while
leaving the source material unchanged. In
addition to general instrumental and vocal
applications, the Hall algorithm is a good
choice for giving separately recorded tracks
the sense of belonging to the same perfor-
mance.
Generally, you should set the Size control
first to establish the dimensions of the space
you are trying to create — or start with a
preset of a similar room size. (Note that
adjusting Size temporarily mutes the out-
puts.) The remaining parameters will deter-
mine the character of the space.

Hall

A1