Lexicon PCM 80 - MIDI IMPLEMENTATION DETAILS Midi Implementation Manual page 56

Lexicon
Range Decode 33
Master level. The parameter always has a range of 80. The values display as -40db through +0db to +40db
in 1db increments.
Range Decode 34
Bipolar percent. The parameter always has a range of 200 which maps to the display values -100%
through 0% to 100%.
Range Decode 35
Rate in Hertz. The value represents a frequency in Hertz in increments of 0.01 Hz.
Range Decode 36
The value is used as a lookup to the following LFO shape assignments:
Sine, Cosine, Square, Saw, Pulse, Triangle
Range Decode 37
The value represents the assignments of a percent from 1% to 99% for a total of 98 values.
Range Decode 38
The value represents a time starting at zero with increments of 20 milliseconds.
Range Decode 39
The value is used as a lookup to the following envelope mode assignments:
Off, One Shot, Retrigger, Repeat
Range Decode 40
The value is used as a lookup to the following switch mode assignments:
Off, Switch, Ramp
Range Decode 41
The parameter always has a range of 240 and the displayed value goes from -121 through 0 to +119.
Range Decode 42
Low cut filter positions. The value is used as a lookup to the following list of valid filter crossover
frequencies.
Off, 20, 21, 22, 23, 25, 26, 27, 28, 31, 32, 35, 37, 40, 42, 45, 47, 50, 52, 56, 58, 62, 66, 70, 74, 80, 84, 90, 94, 100,
105, 110, 115, 125, 130, 140, 150, 160, 170, 180, 190, 200, 210, 225, 235, 250, 265, 285, 300, 320, 340, 360, 380,
400, 425, 450, 475, 500, 525, 550, 600, 625, 675, 700, 750, 800, 850, 900, 950, 1000, 1050, 1100, 1200, 1250, 1350,
1400, 1500, 1600, 1700, 1800, 1900, 2000, 2150, 2250, 2400, 2550, 2700, 2850, 3000, 3200, 3400, 3600, 3800,
4050, 4300, 4550, 4800, 5000, 5250, 5750, 6000, 6250, 6750, 7000, 7500, 8000, 8500, 9000, 9500, 10000, 10500,
11500, 12000, 12500, 13500, 14000, 15000, 16000, 17000, 18000, 19000, 20000
Range Decode 43
The value represents a time starting at zero with increments of 0.1 milliseconds.
Range Decode 44
Chorus rate frequencies. The value is used as a lookup to the following list of chorus rate frequencies in
Hertz.
0.00, 0.01, 0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.11, 0.12, 0.13, 0.14, 0.15, 0.16, 0.17, 0.18, 0.19, 0.20,
0.22, 0.24, 0.26, 0.28, 0.30, 0.32, 0.34, 0.36, 0.38, 0.40, 0.42, 0.44, 0.46, 0.48, 0.50, 0.52, 0.54, 0.56, 0.58, 0.60, 0.62,
0.64, 0.66, 0.68, 0.70, 0.72, 0.74, 0.76, 0.78, 0.80, 0.84, 0.88, 0.92, 0.96, 1.00, 1.05, 1.10, 1.15, 1.20, 1.25, 1.30, 1.35,
1.40, 1.45, 1.50, 1.55, 1.60, 1.65, 1.70, 1.75, 1.80, 1.85, 1.90, 1.95, 2.00, 2.05, 2.10, 2.15, 2.20, 2.25, 2.30, 2.35, 2.40,
2.45, 2.50, 2.55, 2.60, 2.65, 2.70, 2.75, 2.80, 2.85, 2.90, 2.95, 3.00, 3.10, 3.20, 3.30, 3.40, 3.50
PCM 80 MIDI Implementation Details
53