Lexicon MPX G2 V1.1 - INSTALLATION AND RELEASE NOTES Installation Instructions Manual page 14

Software Version 1.1 Installation Instructions & Release Notes
New Parameter Options
Mix
(continued)
The Mix parameter setting is not global. It must be
selected for each desired effect. For presets, the default
setting of the Mix parameter is a wet-to-dry ratio. To
save a new Mix parameter setting, the effect must be
saved as a User program. Refer to the MPX G2 User
Guide for more information about the Mix parameter.
Note:
When the Dry Level option is selected for the Mix
parameters in the Panner and Auto Panner effects,
the dry level is not interpolated.
Note (Test Tone)
Sets the pitch of the sine wave generated in the Test
Tone effect. Press the front panel Options button to
toggle between displaying the setting as a MIDI note or
as a frequency (Hz). The default option is MIDI note.
14
(continued from page 12)
(0 to 100% or Off, -95 to 0dB)
(C0 to G10 or 17 to 25088)
Time (Delay)
Sets the delay time of the selected delay effect. The
setting can be displayed in the formats shown in the
table that begins below.
Option Description
mS Displays the setting in milliseconds.
Delay time is fixed.
Echoes:beat Displays the setting in a rhythmic ratio
of echoes-per-beat. Delay time varies
with tempo, and can be adjusted by
pressing the front panel Tap button.
Feet Displays the setting in feet – the
equivalent distance from a sound source
required to produce the delay. Delay
time is fixed.
Meters Displays the setting in meters – the
equivalent distance from a sound source
required to produce the delay. Delay
time is fixed.
Tap mS Displays the setting in milliseconds
When the Time parameter is selected, a
new setting can be "tapped in."
Lexicon
(0 to 10000)