Table of Contents
Advertisement
Lexicon, Inc.
MC-12 Serial Communications Protocol
7.1.5 MC-12 Parameter Notification by Id (MC-12)
MC-12 will transmit parameter change notifications if they are enabled using the command described in
7.3.42
(MC12_Set_Parameter_Notification_By_Id). If a parameter value is changed due to any user action
or system action the MC-12 will transmit the current value of the parameter that is changing.
7.1.5.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
Data[0]
Data[1]
Data[2]
Data[3-23]
7.1.5.2 Data Description
Same as
Paragraph 7.3.37.2
7.1.5.3 HOST Response
The MC-12 does not expect any response from the HOST.
7.1.5.4 Defaults
The following Parameters Notifications are Enabled in the MC-12 default state:
© 2003 Lexicon, Inc. All rights reserved.
MC_PARAM_NOTIFICATION_BY_ID
24
ParamId(LSB)
ParamId(MSB)
ParamType
Value[0 -20]
Printed on: 08/18/03
0x05
0x18
nn
nn
nn
nn nn
nn...
13 of 94
Advertisement
Table of Contents
