Table of Contents
Advertisement
Lexicon, Inc.
MC-12 Serial Communications Protocol
7.1.4.2 Data Description
ParamId:
Data Type:
Max:
Value:
The Current Value for this system parameter.
Data Type:
Max:
7.1.4.3 HOST Response
The MC-12 does not expect any response from the HOST.
7.1.4.4 Supported System Parameters
The following parameters will be supported by this Parameter Change Notification:
Parameter
Current Effect
Mute
System Volume
Balance
Input Selection
Record/Zone 2 On/Off
Zone 2 Volume
Zone 2 Balance
Zone 2 Mute
Bass
Treble
Loudness
Tilt
Menu Background On/Off
Note: The Record/Zone 2 On/Off only applies to the MC-12 Record zone. The Zone 2 Volume, Zone 2
Balance and Zone 2 Mute only apply to the MC-12 Zone-2.
For Input Parameter Change Notifications the Input Value is a MC-12 to MC-1 input mapping, as shown in
Appendix F MC-12 Input
7.1.5 MC-12 Parameter Notification by Id (MC-12)
MC-12 will transmit parameter change notifications if they are enabled using the command described in
7.3.42
(MC12_Set_Parameter_Notification_By_Id). If a parameter value is changed due to any user action
or system action the MC-12 will transmit the current value of the parameter that is changing.
© 2002 Lexicon, Inc. All rights reserved.
Unsigned 8 bit integer
255.
Unsigned 8 bit integer
Set by the Max Value per the Parameter Definition response Packet for
the Parameter Id of this packet.
MC-12 Parameter
Name
PROGRAM
MUTE
VOLUME
LR_BALANCE
INPUT
RECORD_ENABLED
Z2_VOL
Z2_BAL
Z2_MUTE
BASS
TREBLE
LOUDNESS
TILT
MENU_BKGND
Id's.
Printed on: 10/10/02
MC-1
ParamId(V4.00)
1
3
5
6
7
18
154
156
157
167
168
169
174
190
12 of 92
Advertisement
Table of Contents
