Table of Contents
Advertisement
Lexicon, Inc.
MC-12 Serial Communications Protocol
Zone 2 Balance:
Data Type:
Maximum Value: 32
Conversion:
7.3.7 Get System Parameter Definition (MC-1)
This command is not supported by the MC-12.
7.3.8 Get System Parameter Values (MC-1)
This command is not supported by the MC-12.
7.3.9 Get Effect Definition by Id (MC-1)
This command is not supported by the MC-12.
7.3.10 Get Effect Parameter Definition (MC-1)
This command is not supported by the MC-12.
7.3.11 Get Effect Parameter Values (MC-1)
This command is not supported by the MC-12.
7.3.12 Get Custom Name (MC-12, MC-1)
Request to MC-12 for an effect definition. MC-12 will respond with "Custom Name Packet".
7.3.12.1 Command Packet Description
Application Header:
Command DC_CMD_GET_CUST_NAME
Data Count 0
Application Data:
7.3.12.2 Data Description
N/A
7.3.12.3 Custom Name Response Packet
Application Header:
Command
Data Count
Application Data:
Data[0]- Data[DataCount-1]
7.3.12.4 Data Description
CustomName:
Data Type:
© 2003 Lexicon, Inc. All rights reserved.
Unsigned 8 bit integer.
0 = Left
32 = Right
N/A
DC_RESP_CUST_NAME
Number of Characters in
CustomName + 1
CustomName
Null (0x00) terminated ASCII character string.
Printed on: 08/18/03
0x2B
0x00
0x89
nn
ch ch ch ... 0x00
22 of 94
Advertisement
Table of Contents
