Midi Operation; Selecting A Midi Channel - Lexicon LXP-15-II Owner's Manual

Table of Contents

Advertisement

All LXP-15 II parameters, presets and registers can be accessed by MIDI. All
MIDI applications require the LXP-15 II to be connected with one or more MIDI
devices with standard MIDI cables via the rear-panel MIDI jacks. We'll describe
several typical MIDI configurations below.
Before you can use the LXP-15 II with other MIDI devices, they must all be set
to the same MIDI channel. To set the LXP-15 II MIDI channel:
1. Set the controller you will be using (keyboard, sequencer, other LXP-15 II,
etc.) to transmit on any MIDI channel (1-16).
2. On the LXP-15 II, turn PAGE to "Sys." The display will show:
MIDI chn
Contrast
1
8
Select "MIDI chn" by pressing the button directly beneath it. Then use ADJUST
to select the same MIDI channel as your controller.
NOTE: When "MIDI chn" is set to "OMNI," the LXP-15 II transmits on channel
1 and receives on channels 1-16.
Some extremely useful effects can be created by controlling the LXP-15 II's
variable parameters remotely in real time. Almost all of the controllers found on
a MIDI keyboard or MIDI foot controller (pitch benders, mod wheels, sliders,
switches, breath controllers, foot pedals and footswitches) can be used to adjust
the LXP-15 II's parameters. We refer to this real time remote control capability
as Dynamic MIDI .
Sending a MIDI Program Change message (1-128) from the controller will load
the corresponding LXP-15 II register. If any MIDI sources are active as global or
general purpose patches, moving the appropriate control on the controller will
cause the patched destination parameter to change. (See Patching .) If you want
to use Dynamic MIDI, but don't want the LXP-15 II to load new registers when
you change programs on your controller, set your controller so that it doesn't
transmit Program Change messages, or set LXP-15 II MIDI Program Change to
Off. (See page 6-4.)
Bright
Mem Prot
3
Off
MIDI Out
Selecting a
MIDI channel
Update
Off
Accessing Registers
and Dynamic MIDI
MIDI In
INPUT
OUTPUT
HEADROOM
OVL
12
exicon
18
24

MIDI Operation

6
MIDI Operation
®
ADJUST
PAGE
POWER
Reverb
Level
Pitch/EQ
Mod
Dly
Alg
Setup
Patch 1
LXP-15
Store
Patch 2
Name
Patch 3
VIEW
Global
Patch 4
MIDI
Sys
6-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lxp-15 ii

Table of Contents