Installing The Lxp-15 - Lexicon LXP-15-II Owner's Manual

After unpacking the LXP-15 II, save all packing materials in case you ever need
to ship the unit. Thoroughly inspect the LXP-15 II and packing materials for signs
of damage. Report any shipment damage to the carrier at once. The following
accessories are included with the LXP-15 II:
1. Power Cable
2. Feet (for use if not rack-mounted)
3. Owner's Manual
4. Quick Reference Guide
5. Warranty card (USA only)
Connect the cable end of the LXP-15 II line cord to the LXP-15 II power
connector. Then plug the line cord into an appropriate AC wall socket.
The LXP-15 II measures 19"W x 1.75"H x 13.9"D (483 x 45 x 353 mm). Make
sure that the LXP-15 II is securely screwed into the rack, and that support is
provided for the rear of the chassis during transport to avoid possible damage
from severe mechanical shock.
The maximum ambient operating temperature is 95 F (35 C). Provide adequate
ventilation if the LXP-15 II is mounted in a closed rack with heat-producing
equipment such as synthesizer modules, effects units, or power amplifiers.
Avoid mounting the LXP-15 II directly above power amplifiers.
Installing the LXP-15 II
Installing the
LXP-15 II
Unpacking
Power
Mounting
1
1-1