Lexicon LXP-15-II Owner's Manual page 61

• Use the Gate algorithm
• Initial setting of Predely to 0 is necessary for proper use of tempo control.
• Tempo control of Pdlyhi provides a slap/predelay rhythm that stays constant
through a wide range of MIDI tempos.
• Scale value of 249ms sets the slap rhythm to 32nd-note.
• Tempo control of Slope tailors gate to tempo.
Predely PdlyFbk
0 0
Slope Treble
127 don't care
Src 1 Thresh1
Tempo 0
Src 2 Thresh2
Tempo 127
• Use the Delay/Reverb algorithm.
• InLevl control of Decay turns on infinite reverb. Scale sets the level of the
signal that will trigger the effect. The setting here will cause relatively loud
signals to trigger infinite reverb. To use the effect, play softly to load sounds
into the reverb — then play loudly to layer dry sounds over the reverb wash.
• Experiment with different Sources like Velocity, Pedals or Sliders.
InLevl Mix
100% 50%
Decay Treble
6.1s Full
Src 1 Thresh1
InLevl 0
Parameter Settings
-
-
-
don't care don't care
Patch Settings
Dest 1 Scale 1
Pdlyhii 249ms
Dest 2 Scale 2
Slope
Parameter Settings
Wet Pan Dry Pan
Center
BassMpy
1.00x 71 meters
Patch Settings
Dest 1
Decay
- -
- -
Size Diffus
don't care
Offset 1
-
Offset 2
72% -
OutLevl
Center 100%
Size Diffus
50%
Scale 1 Offset 1
6% -
Creating Sounds and Effects
Tempo Controlled Gate
Infinite Reverb
4-23