Flush Mount (Dcs-33-1) - D-Link DCS-6510 User Manual

Installation
1. Locate a suitable position on the ceiling for a 158 mm (+2 / –0 mm) hole to be cut.
A template is included to aid in marking the mounting hole. Ensure that this hole will
have sufficient access to power, network, and A/V cables.
2. Cut the hole in the ceiling according to the template.
3. Drill 3 separate 6 mm holes corresponding to the holes in the mounting template and
insert the plastic anchors into these holes.
4. Insert the inner mounting ring into the ceiling cavity with the screw guides pointing
towards the floor.
5. Attach the inner mounting ring to the recessed bracket using the three screws
provided.
6. Slip the cosmetic plastic ring over the bracket and turn it counter-clockwise to lock it
into place.
D-Link DCS-6510 User Manual

Flush Mount (DCS-33-1)

Ceiling
Inner Mounting Ring
Ceiling
Recessed
Bracket
Plastic
Ring
Dome
Camera
11