About Page - NETGEAR WAG511 - 802.11a/b/g Dual Band Wireless PC Card User Manual

Dual band wireless pc card 32-bit cardbus
Hide thumbs Also See for WAG511 - 802.11a/b/g Dual Band Wireless PC Card:
Table of Contents

Advertisement

NETGEAR Dual Band Wireless PC Card 32-bit CardBus WAG511 User Manual

About Page

The About page displays the current software version information.
Figure 2-12
The following information is displayed in the About page:
Regional Domain: This is the region setting for the wireless adapter. The approved channels
for the region are automatically scanned. Governments regulate the channels used for wireless
transmission. Operating the wireless adapter in a different region may violate local laws.
MAC Address: The MAC address of the adapter. The Media Access Control address is a
unique 48-bit hardware address assigned to every network interface card. Some wireless
networks will restrict access based on a list of known MAC addresses. If you are
communicating with such a network, you would have to provide the address shown here to the
network administrator before you would be allowed to connect. Restricting access by MAC
address adds an obstacle against unwanted access to your network. However, unless you use
data encryption security, the data broadcast over the wireless link is fully exposed.
IP Address: The IP address assigned to this adapter.
Driver Version: The wireless adapter driver version.
Autocell Version: The Autocell version.
Smart Wireless Utility: The version and release date of the Smart Wireless Utility.
2-14
v4.0, March 2007

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wag511na

Table of Contents