NETGEAR WAG511 - 802.11a/b/g Dual Band Wireless PC Card User Manual page 16

NETGEAR Dual Band Wireless PC Card 32-bit CardBus WAG511 User Manual
c. The InstallSheild wizard screen opens.
Figure 1-2
d. Follow the wizard prompts to install the Smart Wizard Wireless Utility. When the
Installation Complete message appears, click Finish.
2. Next, install the WAG511 Wireless PC Card.
a. Hold the PC Card with the NETGEAR logo facing up and insert it into a CardBus slot.
After a short delay, the Found New Hardware Wizard displays.
Figure 1-3
Note: If a Windows XP logo testing warning appears, click Continue Anyway to
1-4
proceed.
v4.0, March 2007