Direct Command Line Interface - Toshiba SG20 - Magnia - Web Server Customization Manual

Customization
LCD
Panel

Direct command line interface

The command line interface to the LCD/KB port is used for direct display of messages on
the LCD panel.
The following describes the command line interface for script access.
setlcd [–<cmd> [<data>]] <text>
where -<text> is an ASCII text string with NL ('\n') & CR ('\r') support, and where -<cmd>
is described by the following:
Cmd
clear
home
home2
col <col>
row <row>
Because this command bypasses the message queuing system, it is reserved for use by
the LCDKBD and for debugging.
LCD
Controller
COM1
LCD message
definition files
Description
Clear the display.
Home the cursor.
Move the cursor to the second row.
Move the cursor to the column position.
Move the row to the row position.
Application
ShowMsg
LCDKB Daemon
ShowMsg
Application
Clear the display and
home the cursor.
Move to the row=1, col=1
position.
Move to the row=2, col=1
position.
Move the col to <col>.
Move the row to < row >.
LCD panel customization
Comment
37