Configuring The Passive Scm Secondary Configuration Path; Configuring The Passive Scm Subnet Mask - Cisco 11503 - CSS Content Services Switch Administration Manual

Chapter 2 Specifying the CSS Boot Configuration

Configuring the Passive SCM Secondary Configuration Path

Configuring the Passive SCM Subnet Mask

OL-5647-02
To remove the secondary boot type from the passive SCM, enter:
(config-boot)# no passive secondary boot-type
An alternate configuration path allows multiple CSSs to use the same boot image
while keeping their configuration information in separate directories. The CSS
must be able to access the configuration path through an FTP server as defined
through the FTP record for the network boot method. Use the passive secondary
config-path command to specify the secondary alternate path to a network
configuration for a passive SCM network boot method.
When using an alternate configuration path, make sure that the path leads to a
directory containing the script, log, and information subdirectories, and the
startup-config file. These subdirectories must contain the files in the
corresponding subdirectories of the unzipped boot image. First, create these
subdirectories on the FTP server, then copy the files from the boot image to the
subdirectories.
Enter the configuration path as an unquoted text string with no spaces and a
maximum of 64 characters.
For example:
(config-boot)# passive secondary config-path c:/bootdir/
To remove the primary network configuration path, enter:
(config-boot)# no passive secondary config-path
Use the passive subnet mask command to configure the system boot subnet mask
for the passive SCM.
For example:
(config-boot)# passive subnet mask 255.255.0.0
Configuring a Boot Configuration Record for the Passive SCM
Cisco Content Services Switch Administration Guide
2-15