Setting Primary Boot Configuration - Cisco 11503 - CSS Content Services Switch Administration Manual

Setting Primary Boot Configuration

Cisco Content Services Switch Administration Guide
B-6
The information you provide for the primary boot configuration specifies the
location from which the CSS accesses the primary boot image upon system reboot
or when you download new software. When you select Set Primary Boot
Configuration from the Boot Configuration menu, the CSS displays the
following information. If you have previously entered information, the CSS
displays the existing information and default values in square brackets [ ].
Configuring PRIMARY Boot Record
Boot via [N]etwork, [F]TP, [D]isk, or [C]lear: [D]
Press <Enter> to continue...
Boot via Network - Allows you to boot the CSS using FTP from CSS software
•
on a network-mounted file system on a remote system
Boot via FTP - Allows you to download an ADI file containing CSS software
•
that you want to install on the CSS disk (hard or Flash disk)
Boot via Disk - Allows you to boot the CSS from software currently on the
•
CSS disk (hard or Flash disk)
Boot via Clear - Instructs the CSS to boot the CSS from the secondary boot
•
record
This section includes the following topics:
Specifying a Network-Mounted File System as the Primary Boot Record
•
Specifying FTP as the Primary Boot Record
•
Specifying Disk as the Primary Boot Record
•
Specifying Clear as the Primary Boot Record
•
Appendix B Using the Offline Diagnostic Monitor Menu
OL-5647-02