Modifying The Attributes For An Existing Rmon History Index; Deleting An Rmon History Index - Cisco 11503 - CSS Content Services Switch Administration Manual

Configuring an RMON History

Modifying the Attributes for an Existing RMON History Index

Deleting an RMON History Index

Cisco Content Services Switch Administration Guide
6-24
To see a list of existing RMON history configuration identifiers, enter
rmon-history ?.
After you create the identifier for the history, the prompt changes to
(
config-rmonhistory[1]
"Setting the RMON History Attributes"
If create an RMON history index but have not activated it, you can modify the
attributes of the history index (as described in the
Attributes" section). Once the RMON history index is activated, you cannot
modify its attributes. You must delete the history index (see the
RMON History Index"
attributes.
If you have an active RMON history index that requires changes to its attributes
or you no longer need it, delete the RMON history index. Before you delete a
history index that requires changes, note the settings for its attributes.
To delete an RMON history configuration identifier, use the no rmon-history
command. This command is available in the RMON alarm, RMON event, RMON
history, and global configuration modes.
For example, to delete RMON history 5 and its configuration, enter:
(config)# no rmon-history 5
Delete History <5>,[y/n]:y
After you delete the history identifier to change its attributes, recreate it as
described in the "Creating an Index for an RMON History"
Chapter 6
). Now you can define the history as described in the
section.
section), recreate it, and respecify the alarm index
Configuring Remote Monitoring (RMON)
"Setting the RMON History
"Deleting an
section.
OL-5647-02