User Profile Configuration Quick Start; Table 3-1 User Profile Configuration Quick Start - Cisco 11503 - CSS Content Services Switch Administration Manual

Chapter 3 Configuring User Profiles

User Profile Configuration Quick Start

OL-5647-02
For example:
# show profile
@prompt CSS11503
@no expert
alias all reboot "@configure;boot;rebo"
alias all shutdown "@configure;boot;shutd"
alias all logon "@configure;logging line \${LINE};exit"
alias all logoff "@configure;no logging line \${LINE};exit"
alias all aca-load "@script play service-load"
alias all dnslookup "@script play dnslookup"
alias super save_config "copy running-config startup-config;archive
startup-config"
alias super setup "script play setup"
alias super upgrade "script play upgrade"
alias super monitor "script play monitor"
alias super save_profile "copy profile user-profile;archive script
admin-profile
"
set CHECK_STARTUP_ERRORS "1" session
Table 3-1 provides a quick overview of the steps required to configure a user
profile. Each step includes the CLI command required to complete the task. For a
complete description of each feature and all the options associated with the CLI
command, see the sections following
Table 3-1 User Profile Configuration Quick Start
Task and Command Example
Set the length of time a session can be idle before the CSS terminates a
1.
console or Telnet session.
# terminal idle 15
Set the number of output lines the CLI displays on the terminal screen.
2.
# terminal length 35
User Profile Configuration Quick Start
Table 3-1.
Cisco Content Services Switch Administration Guide
3-3