Adjusting The Picture Quality - Denon DVD-2910 Operating Instructions Manual

11 ADJUSTING THE PICTURE QUALITY

Press the PICTURE ADJUST button during playback or
during pause.
• The image quality adjustment screen will appear.
STD
Returns the settings to the factory default settings.
M1 TO M5
1
Image quality settings that have been adjusted to your
preference can be stored to 5 memories, M1 to M5.
SET
SET permits set to setup level and setting of the
screen display position (horizontal and vertical).
Select the memory using the 2 cursor buttons (
press the ENTER button.
IMAGE QUALITY ADJUSTMENT 1
This permits adjustment of the contrast, brightness,
sharpness, tint, and CCS (cross color suppression). /
Advance to Operation 3
IMAGE QUALITY ADJUSTMENT 2
2
This permits adjustment of the setup level, white
level, color density, chroma delay, and NOISE
REDUCTION. / Advance to Operation 4.
GAMMA CORRECTION
This is selected when dark portions of the image are
obscure, or bright portions are much brighter than
necessary. / Advance to Operation 5.
When Image Quality Adjustment 1 Is Selected and
Adjusted:
• Press cursor button (ª), then select the image quality
adjustment item with cursor buttons (
adjustment value with cursor buttons (•, ª), and press
the ENTER button.
• All of the adjusted contents will be stored.
3
CONTRAST (–6 to +6) (Factory default: 0)
• This adjusts the light/dark difference of the image.
BRIGHTNESS (0 to +12) (Factory default: 0)
• This adjusts the brightness of the image.
SHARPNESS (MID) (–6 to +6) (Factory default: 0)
• This adjusts the sharpness of the image for the
intermediate frequencies.
1
2, 3, 4, 5, 6
PICTURE
ADJUST
Remote control unit
, ) and
0 1
Remote control unit
, ), set the
0 1
Remote control unit
P I CT URE MODE
STD M1 M 2 M 3 M 4 M5
1 2
MEMORY 1
M H
0 0 0 0 0
1 2
MEMORY 1
M H
0 0 0 0 0
ENGLISH
SET
0
0
45