NETGEAR WG111UNA - DOUBLE 108MBPS WRLS USB 2.0 User Manual page 37

Figure 4-1: Settings page, Infrastructure configuration
2. Configure the wireless network settings.
In the Network Type section, be sure that Access Point (Infrastructure) is selected.
a.
Enter the SSID. This is also called the Wireless Network Name.
b.
Note: You will not get a wireless network connection unless the network SSID matches
exactly what is configured in the access point.
Tip: You can click the Network tab to view a list of the available wireless networks and
their SSIDs at the location where you are.
3. Save your settings in a Profile.
Type a descriptive name for the
a.
Click Save Profile.
b.
Click Apply.
c.
Click Close to exit the Wireless Assistant or Cancel to return to the previous settings.
d.
4. Verify wireless connectivity to your network.
Verify connectivity using a browser such as Netscape or Internet Explorer to connect to the
Internet, or check for file and printer access on your network.
You can check the status bar in the Wireless Assistant for the current connection status.
Configuration
User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111
Profile in the "Profiles" field.
All the configuration settings are saved in this profile.
202-10026-01
4-3