Alamo Industrial FALCON 15/10 Operator's Manual page 110

Hydraulic Rotary Mower PRE-OPERATION Inspection
Mower ID#________________
Date:
Before conducting the inspection, make sure the tractor engine is off, all
rotation has stopped and the tractor is in park with the parking brake
engaged. Make sure the mower is resting on the ground or securely blocked
up and all hydraulic pressure has been relieved.
The Operator's Manual is in the canister on the mower
All safety decals are in place and legible
The tongue/hitch connection bolts & pins are tight
There are no cracks in tongue or hitch
The tow chain is secured to the tractor & mower
The hydraulic cylinders pins are tight
There are no leaking or damaged hoses
The mower deck is clear of cut grass and debris
Hydraulic cooler is clear of cut grass and debris
Chain guards/deflectors are in place & in good condition
Hydraulic oil is at proper level
Spindle & Motor mounting bolts are tight
All grease points are properly lubed
Blade carrier retaining nut is tight
Blades are not chipped, cracked or bent
Blade bolts are tight
Wheel lug nuts are tight
Transport locks are in good condition
Operator's Signature:
DO NOT OPERATE an UNSAFE TRACTOR or MOWER
This Inspection Form may be freely duplicated for extra copies.
FACLON 15/10 03/09
© 2009 Alamo Group Inc.
OPERATION
________________
Item
Operation Section 4-20
Make ____________________
Shift ____________________
Condition at Specific Comments if
Start of Shift not O.K.