Alamo Industrial FALCON 15/10 Operator's Manual page 107

• Ensure chain guards and/or rubber deflectors
are in position and not damaged. Replace
worn, broken, and
immediately.
• Ensure the driveline integral shields are in
good condition and rotate freely.
• Inspect that all bolts and screws are in
position and are properly torqued. OPS-R-
0074
• Perform scheduled lubrication as specified in
the maintenance section. OPS-R-0076_A
• Ensure each hydraulic cylinder is installed
and retained correctly.
size pins are used to retain the cylinders in
place and are secured with pins.
• Check for hydraulic oil leaks on the cylinders,
along the hydraulic lines, and at tractor
hydraulic ports. IMPORTANT: DO NOT use
your hands to check for oil leaks. Use a piece
of heavy paper or cardboard to check for
hydraulic oil leaks. OPS-R-0077
FACLON 15/10 03/09
© 2009 Alamo Group Inc.
OPERATION
missing sections
Ensure the proper
Operation Section 4-17