Alamo Industrial FALCON 15/10 Operator's Manual page 108

• Ensure that the mower is equipped and
secured with wing brace supports.
• Check the condition of the wing hinge pins.
• Check the condition of the mower axle
suspension spring.
• Inspect mower tire condition, wheel bearings,
and lug nut torque. OPS-R-0078_A
• Inspect blades and blade bolts for looseness
and excessive wear. Make sure the mower is
securely blocked up before crawling beneath.
Replace damaged, worn, and missing blades
as complete sets to maintain rotary balance.
• Ensure carrier hub nuts are tightened with the
cotter pin inserted and spread.
• Inspect the condition of the deck skid shoes
and the skid shoe
OPS-R-0012
HYDRAULIC PUMP/OIL RESERVOIR
• Check oil reservoir level and oil condition. (Add
specific type oil if low)
• Change hydraulic oil filter and hydraulic oil
according to maintenance schedule.
• Ensure there are no oil leaks and fitting are
properly connected
• Inspect overall condition of hydraulic pump.
• Inpsect the tank cooler fan and make sure it is
working properly and clear of debris.
OPS-B- 0093
FACLON 15/10 03/09
© 2009 Alamo Group Inc.
OPERATION
attaching hardware.
Operation Section 4-18