Changing The Microphone Gain; Sand Tx Power Meter Symbols - Yaesu VX-8DR Operating Manual

M
ISCELLANEOUS
At the factory, a microphone gain has been programmed that should be satisfactory for the
internal microphone. If you use the radio under the noisy environment, you may wish to
set a different microphone gain level.
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 60: MIC
GAIN.
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the desired microphone level.
The available selections are LEVEL 1 - LEVEL 9 (factory
default: LEVEL 5).
5. When you have completed your selection, press the PTT
switch to save the new setting and exit to normal operation.
The VX-8DR has four types of S- (Signal Strength) and TX Power Meter symbol formats
available. You may change the default setting to any of the available symbols.
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 89: S-METER
SYMBOL.
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the desired meter symbol
type.
,
5. When you have completed your selection, press the PTT
switch to save the new setting and exit to normal operation.
130
S
ETTING
C
key for one second to enter the Set Mode.
S- TX P
key for one second to enter the Set Mode.
,
M G
M S
, or
VX-8DR O M