Specifications - Denon D RCD-M37 Owner's Manual

ENGLISH
GTunerH
Symptom Cause
Continuous noise • Antenna cable is not properly
is heard when connected.
receiving FM
programs.
Hissing or • This may be noise from a TV or
continuous noise interference from a radio station.
is heard when
receiving AM
programs.
GiPodH
Symptom Cause
iPod cannot be • Device you want to play and set
played. input source do not match.
• Cable is not properly connected.
• Control Dock for iPod's AC
adapter is not connected to
power outlet.
GUSBH
Symptom Cause
When a USB • The set cannot recognize a USB
memory device memory device.
is connected, • A USB memory device not
"USB" is not conforming to mass storage class
displayed. or MTP standards is connected.
• A USB memory device that
the set cannot recognize is
connected.
• USB memory device is connected
via USB hub.
Files on a USB • USB memory device is in format
memory device other than FAT16 or FAT32.
cannot be played.
• USB memory device is divided
into multiple partitions.
• Files are stored in a non-
compatible format.
• You are attempting to play a file
that is copyright protected.

Countermeasure Page
• Connect the antenna cable 10
properly.
• Connect an outdoor antenna. –
• Turn off the TV. –
• Change the position and direction 10
of the AM loop antenna.
Countermeasure Page
• Select an appropriate input 18
source.
• Reconnect. 10
• Plug the Control Dock for iPod's –
AC adapter into a power outlet.
Countermeasure Page
• Check the connection. 11
• Connect a USB memory device –
conforming to mass storage
class or MTP standards.
• This is not a malfunction. DENON –
does not guarantee that all USB
memory devices will operate or
receive power.
• Connect the USB memory device –
directly to the USB port.
• Set the format to FAT16 or –
FAT32. For details, refer to the
USB memory device's operating
instructions.
• When divided into multiple –
partitions, only files stored in the
top partition can be played.
• Record the files in a compatible 20
format.
• Files that are copyright protected 20
cannot be played on this set.

Specifications

n
Audio section
• Power amplifer
Rated output: 30 W + 30 W (6 Ω/ohms, 1 kHz T.H.D 10 %)
n
Tuner section
Reception frequency range: FM: 87 .5 MHz ~ 107 .9 MHz
FM: 1.5 μV/75 Ω/ohms
Receiving sensitivity:
FM stereo separation: 35 dB (1 kHz)
n
CD section
Playback frequency response: 2 Hz ~ 20 kHz
Wow & flutter: Below measurable limits (± 0.001%)
Sampling frequency: 44.1 kHz
n
Clock/Timer section
Clock method: Crystal oscillator (Within 1 ~ 2 minutes per month)
Timer: Everyday/Once timer: One system each
Sleep timer: 90 minutes, maximum
n
General
Power supply: AC 120 V, 60 Hz
Power consumption: 65 W
Approx. 0.3 W (standby)
Maximum external dimensions: 210 (W) x 115 (H) x 308.5 (D) mm (8-17/64" x 4-33/64" x 12-9/64")
Weight: 4.3 kg (9 lbs 7 oz)
n
Remote control unit (RC-1097)
Remote control method: IR pulse method
Power supply: R03/AAA Type (two batteries)
Maximum external dimensions: 49 (W) x 220 (H) x 24 (D) mm (1-59/64" x 8-21/32" x 15/16")
Weight: 110 g (Approx. 3 oz) (including batteries)
b For purposes of improvement, specifications and design are subject to change without notice.
AM: 520 kHz ~ 1710 kHz
AM: 20 μV