Sleep Timer Playback - Denon D RCD-M37 Owner's Manual

13
[o p]
8 9
U se , or to set the "minutes" for the
timer stop time.
14
MENU/SET [ENTER/MEMO]
Press or
The "minutes" for the timer stop time are set.
15
[o p]
8 9
U se , or to turn timer playback on.
Display Once timer
1_off/E_off OFF
1_on/E_on ON
1_off/E_on OFF
1_on/E_off ON
b When turned on, " " lights.
16
MENU/SET [ENTER/MEMO]
P ress or
The timer setting is set.
17
A djust the volume for when the timer starts using
VOLUME
.
18
Set the power to standby.
The timer playback standby mode is set.
n Canceling the timer
MENU/SET
Press twice.
At step 15 under "Setting the Timer" , use
turn off the timer on/off indicator and turn off "
n To check the timer settings
MENU/SET
q Press
The "TIMER" is displayed.
E E OFF AM12:00 OFF AM12:00
w Press 8, 9
The "EVERYDAY" or "ONCE" is displayed.
.
MENU/SET
e Press
The display switches each time the button is pressed.
n To change the timer settings
Repeat the procedure under "Setting the Timer" (vpage 22).
1_OFF/E_ON 1_OFF/E_ON
n To change the setting while setting the timer
Everyday timer
<BAND/2>
Press
OFF
Return to step 2 under "Setting the Timer" (vpage 22). Repeat
the procedure.
ON
ON
n To clear the timer settings
OFF
MENU/SET
q Press
The "TIMER" is displayed.
8, 9
w Press
The "EVERYDAY" or "ONCE" is displayed.
.
e While "EVERYDAY" or "ONCE" is displayed, press
[2]
for at least 2 seconds.
n If there is a power failure
The time setting and the timer settings are cleared. Reset the
current time, then reset the timer.
n When performing a timer setting with DENON
control dock for iPod (ASD-3N or ASD-3W)
Pause the track you want to play, and keep the power on for DENON
control dock for iPod.
8, 9 [o p]
or to
" .
When the function is set to iPod, the timer cannot be set. To set the
timer, first switch to a function other than iPod.
.
[o p]
or .
.
[2]
or .
.
[o p]
or .
<BAND/2>

Sleep Timer Playback

Use this function to automatically switch the power to the
standby mode after a specific amount of time (minutes).
The sleep timer can be set to up to 90 minutes, in steps
of 10 minutes.
1
Select and play the desired function.
2
[SLEEP]
Press and select the setting time.
90 80 70 60
OFF
("SLEEP " indicator turns off)
The "SLEEP" indicator flashes.
3
[SLEEP]
Press while the "SLEEP" indicator is
flashing.
The set time is displayed.
or
b After about 5 seconds, the set returns to as it was before the
sleep timer was set, and the "SLEEP" indicator lights.
n Canceling the sleep timer
[SLEEP]
Either press at step 2 under "Sleep Timer Playback" until
ON/STANDBY
"OFF" is displayed, or press
n To change the setting while the sleep timer is set
[SLEEP]
Press .
n Checking the time remaining until the sleep timer
starts
[SLEEP]
Press .
Return to step 2 under "Sleep Timer Playback" .
ENGLISH
50 40 30
10 20
.