Advertisement
The software versions can be displayed on the radio
While holding the three buttons [GEN]＋[50]＋[ENT]
new software versions
11.53 1.11
radio will start up in normal operation.
EDSP:
Software version
We hope this new software will increase your enjoyment of your FT-950. Thank you for
choosing Yaesu radios. If you have any problems or questions please contact Vertex
Standard, Amateur Tech Support.
Best regards,
Mikio Maruya, WA6F
Executive Vice President
Engineering & Customer Service
Vertex Standard USA, Inc.
Vertex Standard USA, Inc. | 10900 Walker St. | Cypress, CA 90630 | 714.827-7600 | FAX: 714.827-8100
will be displayed in the VFO-A window for 5 seconds, and then the
11.53
amateurtech@vxstdusa.com
www.vertexstandard.com
turn the radio on. The
Main CPU:
Software version
0112
Advertisement
