Wing Driveline - Alamo Industrial Eagle 14 Operator's Manual

MAINTENANCE

WING DRIVELINE

Figure MntP-R-0011) Remove the two shield
bearings per half shaft by prying the head of the
bearings up with a screwdriver, and pulling them out
with pliers.
Figure MntP-R-0012) Grasp the Yoke and shield
tube and pull shaft from the shield.
Figure MntP-R-0013) Grease the shield bearing
grooves on the yokes and the inner telescoping
member before assembly.
Eagle 20 03/09 Maintenance Section 5-8
© 2009 Alamo Group Inc.