Table of Contents
Advertisement
DIVIDER GEARBOX
The Test Plug for the Divider Gearbox is located on the right side of the input shaft. The filler pressure relief
Plug is on top of the Gearbox. FIGURE MntP-R-0005.
Do not over-fill. If Gearboxes are filled above Test Plug Level, pressure under working
conditions may cause the Grease Seals to leak.
Recommended lubricant is a NLGI"000" EP Grease (P/.N 00769030 for on quart) for divider gearbox.
Eagle 20 03/09
© 2009 Alamo Group Inc.
MAINTENANCE
Maintenance Section 5-5
Advertisement
Table of Contents
