Table of Contents
Advertisement
4
Wipe the white underside of the scanner cover until it is clean and dry.
5
Open the bottom ADF door.
6
Wipe the ADF scanner glass under the ADF door.
7
Close the bottom ADF door.
8
Wipe the scanner glass (flatbed) and backing material by moving the cloth or paper towel from side to side.
9
Close the scanner cover.
Adjusting scanner registration
Scanner Registration is a process to align the scan area with the paper location. To manually adjust the scanner
registration:
1
Turn the printer off.
2
Clean the scanner glass and backing material.
3
Hold down
and
4
Release the buttons when the screen with the progress bar appears.
The printer performs a power‑on sequence, and then the Configuration menu appears.
5
Touch the down arrow until Scanner Manual Registration appears.
6
Touch Scanner Manual Registration.
7
Touch Print Quick Test to print a registration page.
8
Choose the section of the scanner to align.
while turning the printer on.
Maintaining the printer
4
Advertisement
Table of Contents
