Storing Numbers Under Group Keys - Sharp 3800M - B/W Laser - All-in-One Operation Manual

Storing Numbers Under Group Keys

Group keys allow you to dial a group of fax numbers by simply pressing the
appropriate Group key once. They are convenient for the Broadcasting
function, which is used to transmit an original to a group of fax machines.
All Rapid keys can be programmed as Group keys. To program or clear a
group key, follow the steps below. Note that one key cannot be programmed
as both a Rapid key and a Group key at the same time.
• Up to 50 fax numbers can be stored in one Group key.
• Only Rapid keys and Speed Dial numbers can be stored in a Group key.
No full numbers can be stored.
Use the following procedure to store numbers under Group keys:
Step Press these keys
1
FUNCTION
2
3
01
4
02
SUK 06 INITIAL LEO.p65
JKL
ABC
or
(example)
09
. . .
ABC ABC ABC
. . .
(example)
INITIAL SETTINGS
61
Comments
"GROUP ENTRY MODE"
will appear in the display.
Press "1" (SET) to
program a Group key, or
"2" (CLEAR) to clear a
Group key.
Setting:
Press the Rapid key you
wish to use as a Group
key . "GROUP #=XX" will
appear in the display,
followed by "DIAL #="
Clearing:
Press the Group key you
wish to clear, and then go
to Step 7.
Enter fax numbers using
one or both of the
following methods:
• Press one or more Rapid
keys.
• Enter one or more Speed
Dial numbers with the
number keys.
30/03/00, 17:01
Fax Setup
6
61