Ricoh Aficio MP 1600SPF Copy Reference Manual page 51

❖ Base Point
The base point of Reduce/Enlarge differs depending on how the original is
scanned. When the original is set on the exposure glass, the upper left corner
will be the base point. When it is set in the ADF or ARDF, the bottom left cor-
ner of the original will be the base point.
The figure below is the resulting copy images that differ depending on how
the original is scanned.
1 Base point when placing on the exposure glass
2 Base point when placing in the ADF or ARDF
A
Press [R/E].
B
Press [Enlarge] or [Reduce].
C
Select a ratio using {U} or {T}, and then press the {OK} key.
The "
Programmed
D
Place the originals, and then press the {Start} key.
Reference
"Reproduction Ratio", General Settings Guide
"Preset R/E Priority", General Settings Guide
GCKA031e
" message appears.
Copy Functions
2
41